TechnoMarine By Invicta Watch Group 12-Pieces Watch Tool & Sizing Kit

Description

Watch Tool Kit Includes
One Band opener
One Case opener
One Hammer
Two Punch pins
One Stand
One Pin remover
Five Screw drivers
How to Use
Band Opener: This removes the links for the smaller size bands. Lay the bracelet flat on the cradle making sure that the arrows printed on the extension links face away from the tool's push pin. Make sure the link pin and the pin from the tool are properly aligned when pushing the pin out. Please refrain from pushing out at an angle, because the pin may break. Keep in mind that you do not need a lot of force to make these pins come out. If for any reason you are turning the knob and nothing is happening, stop and realign. To reconnect the links, simply push the closed part of the pin against the arrow.
Case Opener: This tool assists in removing a case back that is pressure closed. However, it should not be used if the case back is screwed down. Simply slide the tool through the small gap and pop the case back off.
Stand: Use this to hold the bracelet in place while hammering out the pin to remove or add links for larger sized bands. On the underside of the bracelet links, there will typically be an arrow pointing in direction the links should be pushed out. Position the pin pusher over the pin to be removed and tap the pin out from the top with the small hammer.
Pin Remover: This allows you to remove the band from the dial. Slip the tool between the band and the case where the spring bar is located. Then use this tool to unhook the spring bar thereby releasing the band.
View more great items
WE ARE CLOSED MONDAY AND TUESDAY, IF YOU MAKE A PURCHASE BEFORE 6 O'CLOCK SUNDAY WE STILL SHIP YOUR ITEM BY MONDAY, ALL ORDERS THAT RECEIVED AFTER THAT TIME WILL BE SHIPPED BY WEDNESDAY MORNING,
SORRY ABOUT THIS INCONVENIENCE